| After-sales Service: | 24 Hours Service |
|---|---|
| Warranty: | 12months |
| Weighing: | >300kg |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
| Key Name | Function | Description |
| MENU | Enter Main Menu / Exit. | |
| LOCK* | Key-locking / Key-unlocking. | |
| Cursor shifts right. Display the previous interface or option. |
||
| ZERO* | Manual Zero without Power-down Protection. | |
| Display the next interface or option. Digit input: +1 ( 0~9 loop). |
||
| SET* | Setpoint Parameters Setting. | |
| 8 | ENT | Enter / Save / Clear Alarm. |
| CLS* | Clear Screen [Clear the display value of Peak Hold Value and Weight-checking Value]. |
| Sign | Alarm Cause | Solution |
| Err1 | RAM Failure. | Replace the chip RAM. |
| Err2.1 Err2.2 |
EEPROM Failure. | Replace the chip EEPROM. |
| Err3 | Unused. | |
| Err4 | ADC Failure. | Replace the ADC module. |
| oV-Ad | Over ADC Range. | Weighing signal exceeds A/D conversion range. 1. Check if the loadcell is connected. 2. Check if the capacity of loadcell is too small. 3. Check if the loading weight is too big. |
| oL | Overload Alarm. | Gross Weight > (Scale Capacity + 9 × Scale Division). 1. Check if the loadcell is connected. 2. Check if the capacity of loadcell is too small. 3. Check if the loading weight is too big. |
| oV-nZ | Over 'Manual/Auto Zero Limit'. | Refer to parameter [123] 'Manual/Auto Zero Limit'. |
| tXX.XX | Preheating Time Countdown [min.sec]. | Refer to parameter [128] 'Zero Upon Power Up', [129] 'Power Up Zero Time' and [130] 'Power Up Zero Limit'. Wait for the preheating time over or press any key to exit. |
| oV-Zr | Over 'Power Up Zero Limit'. |
| Main Menu | Second Menu | ||
| Sign | Function | Sign | Description |
| F1.SEt | Parameter Setting | -SCAL | Scale parameters setting. |
| -CALP- | Calibration parameters setting. | ||
| -SEtP- | Setpoint parameters setting. | ||
| -SErP- | Communication parameters setting. | ||
| -dISP- | User interface parameters setting. | ||
| F2.CAL | System Calibration | -ZEro- | Zero Calibration without loading on the weigher to correct Zero Value. |
| -dAtA- | Data Calibration: Input the specification parameter values of loadcell according to the actual configuration of the weighing system to correct Span Coefficient. If there is no access to get the specification parameter values for Data Calibration, then it's necessary to do Load Calibration. | ||
| -LoAd- | Load Calibration: After doing Data Calibration, if there are conditions for Load Calibration, do Load Calibration with loading standard weight on the weigher to correct Span Coefficient further for higher weighing accuracy. | ||
| -SEgC- | Segmenting Span Correction: After doing Zero Calibration and Load Calibration [or Data Calibration], it's allowed to do Segmenting Span Correction with loading standard weight on the weigher by 10 Correction Points to get Span Correction Ratio of 10 linearity segments for higher weighing accuracy. | ||
| F3.rEC | Unused. | ||
| F4.CLn | Clear Screen: Clear the display value of Peak Hold Value and Weight-checking Value. | ||
| F5.Loc | Key-locker | -oPEn- | Key-unlocking. |
| -Locc- | Key-locking. | ||
| -PASS- | Password Set. Exfactory Passwords:
|
||
| Main Menu | Second Menu | |||
| F6.FAC | Factory Adjustment | Special for manufacturer. | ||
| -SPAn- | mVExfactory Span Adjustment: Use standard weighing test equipment to adjust the weighing signal interface for normalizing Span Coefficient to 1. | |||
| -AdtS- | Weighing Signal Linearity Test. | |||
| -AVZF- | AO [0~20mA] Zero/Full Adjustment. VO [0~10V] Zero/Full Adjustment. |
|||
| -AVtS- | AO [0~20mA] Linearity Test. VO [0~10V] Linearity Test. |
|||
| -dIdo- | DI/DO Input&Output Test. | |||
| -dEFU- | RAM Reset: Reset to factory defaults. | |||
| -dStS- | Display/DO Reliability Test. | |||
| F7.InF | Product Information | Only for query. | ||
| --VEr- | Version No. | |||
| --Sn-- | Serial No. | |||
| -dAtE- | Exfactory Date. | |||
| -HArd- | Hardware Configuration. | |||
Changsha SUPMETER Technological Co., Ltd., as a council member of China Weighing Instrument Association (CWIA), is a high-tech enterprise which specializes in designing and manufacturing weighing/batching controller, force measuring controller, explosion-proof controller and related system software.
Since founded in 2004, SUPMETER is persisting in doing the same thing of 'customizing satisfied products for you and building win-win cooperation with you' and insisting on the core idea of 'Being Super in Meter and Being Perfect in Service'. On the quality basic of 'Accurate Weighing, Quick and Steady Control, Standard Communication Bus and Protocol, Suitable for Industrial Environment', SUPMETER is doing the best to meet your individual requirements and to reach the enterprise goal of 'Outstanding Quality, Continuous Improvement, Effective Service and Customer Satisfaction'.
The products of SUPMETER have been sold to over 1000 weighing equipment manufacturers from China, Germany, USA, Canada, Australia, Russia, Ukraine, Uzbekistan, Turkey, Pakistan, India, Thailand, Vietnam, Philippines, Malaysia, Indonesia, Singapore, Sri Lanka, South Africa, Nigeria, Zimbabwe, Iran, Saudi Arabia, Jordan, United Arab Emirates, Oman, Palestine, Mexico, Brazil, Argentina, Venezuela, Honduras, Bolivia, Chile, Peru and other countries and regions. And we have built long-time relationship of technical exchange and co-development with many famous enterprises. By tracking and applying international advanced technology and combining with all kinds of typical applications from the worldwide customers, SUPMETER has developed multiple high-quality products for customers and became a famous enterprise and brand in weighing, batching and force measuring field.
We will do our best to make our development more high-efficiency, quality more superior, service more enthusiastic and price more reasonable. SUPMETER, as your faithful team of product-development and technical service, is one of your best choices.
Our advantage is that we can customized the software to our customer's requirements.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}